Frequently Asked Question
Switch to Motion Only Recording (Browser - Old UI)
Last Updated 4 years ago
1. Use Internet Explorer to Login to your System
2. Click on Configuration->Schedule Settings
3. Click on Edit
4. From the drop down box, switch from Continuous to Motion Detection
5. Enable Copy to Week - > Select All
6. Click on Copy To and Select all other cameras you would like to copy the recording schedule to. 7. Next, go to Motion Detection 8. Click on Enable Motion. Draw the area you would like to detect motion in.
If you are unable to see any images, ensure you are using Internet Explorer and had installed the plugin successfully when prompt.
9. Adjust the sensitivity of the motion detection. Higher means less movement will trigger the detection. Lesser means more movement will be required trigger the detection. You might need to fine tune this over time.
10. Click on save, and repeat the procedure for other cameras.
2. Click on Configuration->Schedule Settings
3. Click on Edit
4. From the drop down box, switch from Continuous to Motion Detection
5. Enable Copy to Week - > Select All
6. Click on Copy To and Select all other cameras you would like to copy the recording schedule to. 7. Next, go to Motion Detection 8. Click on Enable Motion. Draw the area you would like to detect motion in.
If you are unable to see any images, ensure you are using Internet Explorer and had installed the plugin successfully when prompt.
9. Adjust the sensitivity of the motion detection. Higher means less movement will trigger the detection. Lesser means more movement will be required trigger the detection. You might need to fine tune this over time.
10. Click on save, and repeat the procedure for other cameras.