This is a general manual for the solar controller. The solar controller does not need any settings from users after deploying. This is for references only. Please do not change any settings in the system deployed. Any issues due to change in settings are not covered under warranty. IMPORTANT 1. Make sure the battery has sufficient voltage for the controller to detect the battery type before first installation. 2. The battery cable should be as short as possible to minimise loses. 3. The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL. It is not suitable for nickel metal hydride, lithium ions or other type of batteries. 4. The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
LCD Display/KeySystem Connection 1. Connect the battery to the solar controller. (+/-) 2. Connect the photovoltaic module (solar panel) to the solar controller. (+/-) 3. Connect the load to the solar controller. (+/-) LCD Display/Settings Att: 1. Press the [DOWN] button to ON/OFF load manually at the main display. 2. The work mode is working as below. [24H] - 24 hours load output [1-23H] - load on after sunset and X hours timer to operate. [OH] - Dusk to dawn Troubleshooting *Note: This is a general instruction manual. Actual product may differ. Product specifications are subjected to change without prior notice.
