Frequently Asked Question
HIKVISION DVR - Mobile App Add QR Code
Last Updated 4 years ago
This step by step guide is using the iPhone version. Other mobile devices' might differ slightly.
Visit Appstore, search for "IVMS-4500" apps from "HIKVISION Digital Technology Co."
Download and Install the App.
Open the App After Installation. Select the Region you are in.
Open the Configuration Page.
Click on Devices
Click on Scan QR Code.
Aim the Camera at the QR Code configuration that was given to you.
The settings should be imported automatically.
If you had changed any of the settings, e.g. password, the QRCode will be invalid. Proceed to use the Manual Adding instead.
You'll need the following.
Alias :
Register Mode : HiDDNS
Device Domain :
User Name :
Password :
Click on Save, then live view.
You should be able to see your system through the internet if everything is configured correctly.
Visit Appstore, search for "IVMS-4500" apps from "HIKVISION Digital Technology Co."
Download and Install the App.
Open the App After Installation. Select the Region you are in.
Open the Configuration Page.
Click on Devices
Click on Scan QR Code.
Aim the Camera at the QR Code configuration that was given to you.
The settings should be imported automatically.
If you had changed any of the settings, e.g. password, the QRCode will be invalid. Proceed to use the Manual Adding instead.
You'll need the following.
Alias :
Register Mode : HiDDNS
Device Domain :
User Name :
Password :
Click on Save, then live view.
You should be able to see your system through the internet if everything is configured correctly.