Frequently Asked Question

Linksys Smart Wifi Internet Router Port Forwarding
Last Updated 6 years ago

Default IP for Linksys Router is 192.168.1.1
Default Singnet Router IP is 192.168.1.254

If you are switching from Singnet Router to Linksys Router, you'll need to configure Linksys Router's IP to 192.168.1.254.
Refer to this guide on how to do it.
https://www.lakson.com.sg/ticket/kb/faq.php?id=125

Alternatively, you can also change your CCTV IP Gateway to your new Linksys Router's IP (192.168.1.254->192.168.1.1)

Assuming you have configured your Linksys Router IP to 192.168.1.254 and your CCTV IP is 192.168.1.64 and using port 88,8000,554.

1. Login to your Linksys Router and Click on Security at the left bottom corner.

image

2. Click on Apps and Gaming
3. Click on Single Port Forwarding
4. Add the ports your CCTV uses forwarded to the IP that your CCTV use, in this example which forwards Port 80, 8000, 554 to IP 192.168.1.64

image

5. Click on Apply.

The port forwarding is done.

Note that this is a guide.
You may not be using the same ports/ip for your CCTV system, or using the same IP/IP Subnet for your internet router.
Adapt it to your own individual network settings.


Please Wait!

Please wait... it will take a second!